显示标签为“powheel”的博文。显示所有博文
显示标签为“powheel”的博文。显示所有博文

2014年9月29日星期一

Mission Statement

The mission of electricbike.com is to make the public aware of the quickly evolving electric bike, by providing honest reviews and ride reports on commercially viable products. Because what most people want (fast, long range, and cheap) does not exist on the open market, we are writing a series of stories which will make the task easier on which compromise you should make.  Basically if you pick wisely, you can have 2 of the things on the list, (i.e. fast and cheap) and only compromise one.
Electricbike.com was bought from Walt Breitinger in February of  2012 by Eric Hicks, an E-bike enthusiast presiding in San Francisco California.  Eric was one of the pioneers in the electric bike business when he owned the largest personal electric vehicle store in the country, Extreme Green Machines located at 989 Market St in San Franciso. Eric had started an electric bike shop and rental store  first in San Francisco’s Fisherman’s Wharf,  and then opened a smaller store at 940 Market St, finally ending in the 6,000 sq/ft mega-store on Market St (the main Street in San Francisco).
The Extreme  Green Machine store was selling hundreds of electric bicycles and scooters a month. Electric vehicles were everywhere in San Francisco. It looked like the market would continue to grow. However, as it turns out,  poor battery and motor technology at the time made electric vehicles both expensive, heavy, slow, and unreliable.  Extreme Green Machines lost its store in Fisherman’s wharf to a lithium battery fire.  Because of the poor quality of electric scooters and bicycles at the time,  Extreme Green Machines was spending much of their efforts  repairing broken E-bikes and scooters. Customers were not happy etc.  In 2002, Extreme Green Machines was forced to close its doors due to the lack of good electric small vehicles to sale.
Right before it closed, Extreme Green Machines helped organize a hill climb race in the Marin Headlands in which 40 riders showed up.  Eric raced on an Etek-powered scooter called the Jackal that he and Thunderstuck Motors had teamed up to produce. Speeds of 50mph were hit while racing up the hill.
Eric continued enjoying his Jackal and riding around San Francisco and waited for the technology to advance before buying an new machine.
Then in 2010, when hanging out at one of his favorite museums in San Francisco, Academcy of Sciences, Eric saw the display of a commercially available E-bike, which was the most beautiful E-bike he had ever seen. Eric read the placard in front of the “Optibike”, and it said the price of the Optibike was around $5,000. Eric said to his friend that if that bike was $5,000 he was buying it tomorrow!  Eric couldnt believe it…its too good to be true. Lithium powered, 3o-mph, 30-mile range and only $5,000 (cheap for those kind of numbers). Fast, cheap and long range.  Eric rushed home  muttering “it’s time”  and googled Optibike. It turns out it was not a $5,000 E-bike on display at the musuem, but a $15,000 rich man machine, which was only capable of speeds of around 20-mph without pedaling and realistically only had a range of around 20 miles.  Read Eric’s Review of the Optibike.
Eric realized after further research that electric bikes were getting close to the target of being a viable form of transportation because battery technology and motor technology were rapidly progressing. China was now making better-quality products, and are making millions of  electric bikes for its own citizens. The result is that the technology is getting cheaper for every country. The best lithium batteries are still somewhat expensive, but they are a lot safer and cheaper than they were 5 years ago, and because car companies are striving to make affordable and dependable electric cars, battery technology is improving quickly.
What has happened with electric bikes recently is nothing short of phenomenal. The technology is evolving and the results are building on each other.
Right now the best bikes that exist are built out of garages. Eric and some friends in SF began building their own electric bikes, and partaking in “epic” rides.  These group of friends became huge E-bike enthusiasts who meet for rides regularly and are working on building the perfect bike. Electricbike.com is made up of articles composed by this core group of guys who are all very passionate about their own electric bikes .
The adventure that an electric bike can offer is nothing short of amazing. In the electric bike  inner circle we call it “the E-bike grin”.  Right now to have that experience either requires E-bike building experience and knowledge, or a lot of money to buy a quality E-bike like the Optibike. The purpose of electricbike.com is to provide knowledge on how to do both….either buy or build.
What’s more exciting is that there are some turn-key electric bikes in the development stage right now, and they seem like they will change the entire market…maybe even make “build yourself” E-bikes obsolete if they can manage to become affordable. We at electricbike.com are following the progress of these new bikes and will keep the public updated as they are released.
We at electricbike.com whole-heartedly believe that we are in the beginning stages of a revolution, where E-bikes will become a viable form of transportation to Americans, first in the big cities like San Francisco, and then everywhere else.
Electricbike.com is determined to be at the forefront of that revolution, providing information you can depend on.

2014年9月25日星期四

Custom Build Gallery, Deecanios Astro mid drive

This mid drive build was started way back in 2008, but…it was so ahead of it’s time, it is still awesome by todays standards. Deecanio is the member-name of an endless-sphere.com builder from the UK who created this historic milestone E-bike.
He decided he wanted something completely new and cutting edge. He had read about how the components for Radio-Controlled (RC) aircraft models had grown large enough that they were beginning to be used on electric bikes. RC components can be found that are very powerful, but the reason for their high price is that they are very small, and it is having high power in a small package that he was willing to pay extra for.
Deec likes riding off-road, so he was immediately drawn to the idea of a mid drive system. The RC motor. controller, and reduction might be light, but it would be extra sweet if the modest weight of the drive could be centrally located, and also placed down low for a great balance.
2008 was about the same time that Matt (ES member “recumpense”) was doing a lot of development work to make highly professional mounts and also drive-reductions for Astro Flight motors. His designs are works of machinist art, and he is a pioneer in this field.
Here is a link to his monster yellow trike from 2012.
_______________________________________________________
Motor and Reduction
Early in the design stage, Deec knew he wanted to have a light mid drive. He had owned a powerful rear hub bike before, and although it was fun…when he was in slow uphill technical sections of off-road crawling, the hub would get hot from low RPMs. Also, when he took jumps, he noticed that the extra hub weight in the rear had a noticeable effect on the bikes handling, compared to non-hub bikes.
Matt Schumacher had just started developing high-end RC motor drives that established a new standard of performance and quality. Deec discussed all the options and decided to use an Astro Flight 3210 motor with a dual reduction. The primary reduction would be turning very fast, so Matt recommended that Deec use a belt and pulleys for that, which would run much quieter than a chain.
Deec wanted to keep the drive fairly small, because he didn’t know yet exactly where it was going to be mounted, but he did already know that his Kona Stinky full-suspension frame didn’t have much room anywhere. The primary reduction 60T driven pulley was the smallest one that would allow a White Industries ENO 22T freewheel to fit inside the pulley face (after the 22 teeth are machined off, the factory circumferential slots provided perfect mounting points).
The 17T drive pulley provides a ratio of 60:17, which equals 3.5:1
The Astro 3210 motor with the belted primary reduction. The ENO freewheel has been integrated into the 60T pulley.
This left the secondary reduction to sort out. The drives’ freewheel allows the pedals to drive the bike without also needing to back-drive an un-powered motor. Since the motors’ freewheel was located in the primary drive, this freed-up the secondary chain drive to use the smallest possible drive sprocket.
Deec and Matt had settled on using high-quality #219 Kart chain for the secondary. The secondary reduction turns at a lower speed, but feels more torque, so a narrow and strong chain is appropriate.
The chainring was going to be the maximum diameter possible regardless of the chain pitch, and…the small pitch of the #219 chain allowed the drive sprocket to have the minimum needed 11 teeth in a smallersprocket than a bicycle-pitch chain (11T+ to avoid the high noise from the “polygonal effect” when using sprockets with 10 teeth or less), and the 80:11 ratio provided a significant 7.3:1 reduction in RPM’s.
The combined primary and secondary reductions (3.5 X 7.3) results in a 25.5:1 reduction in RPMs between the motor and the crankset. The motor chosen is a radial-flux in-runner Astro 3210 “10-Turn”, which has a Kv of 135-RPMs per volt. If the bike is unloaded (with the tires in the air), a Kv of 135 X 48V = 6,480 RPMs!
Ultra-high RPMs are one method to getting high power from a small motor. As a result, these Astro motors make a high-pitched turbine noise when at full power (Here is a video to show the sound). It’s not too loud, but it is definitely not silent. Running 6,480 RPMs through a 25.5:1 reduction will result in the crankset spinning 254 RPMs.
When a bike is driven on the road, it is a rule-of-thumb that the RPMs will be roughly 20% lower than when it is unloaded, but…even at around 200-RPMs (at full throttle) this system was still going to be way too fast to be able to pedal along with it.
_______________________________________________________
The Tiny RC Controller
The largest RC motors are surprisingly powerful when you consider their tiny size, but the RC component where this size difference is the most notable is the controller. Getting peaks of 3,800W from a controller this tiny is expensive.
This is the 2014 version of the 2008 ESC that Deec used. The one pictured is rated for peaks of 160A and also has a cooling fan attached. Adapting tiny RC components to electric bikes requires careful design matching, and in this case…adding extra low-ESR capacitors to the power inputs.
Deec had decided to use the tiny and well-regarded RC Electronic Speed Controller (ESC) from Castle Creations. The 50V max HV-110 (High Voltage, 110A) looked like it would work well, since he intended to give the motor the use of the bikes gears (as opposed to the higher amp-draw peaks from a direct-chain “one speed”). That not only kept the motor RPMs high in order to help with the slow-speed off-road performance, it also reduces the peak amps that are drawn by the controller and pulled from the battery.
______________________________________________________
The Battery
When we talk about a 48-volt battery, that number is sometimes called it’s “nominal” rating. Deec had chosen to use the very safe LiFePO4 chemistry, and in 2008, the high-current cell to get came in a large cylinder from Headway. He arranged for ES member GGoodrum in the USA to build a pack for him to fit the small triangle of his favorite 2004 Kona Stinky frame. But how many cells and how to arrange them?
The average LiFePO4 pack that is called “48V” uses 16 cells in series (16S). If we use the charge profile of 3.6V per cell when fully charged, a 16S pack will actually start at 57.6V, which would damage the 50V ESC as soon as it was plugged in (if you set the Low Voltage Cutoff / LVC at 3.0V per cell, the battery will actually stop at 48.0V). This led GGoodrum to recommend the odd arrangement of using 15 cells (15S), resulting in a user profile between 45.0V when low, up to 54.0V when fully charged.
Here you can see the rear shock absorber on the Kona Stinky takes up some of the frames triangle space. Deec has put the charger and also the BMS in a metal box with a fan to keep them cool, and at this early stage in the bikes development, he has to remove the side panel to hook up the charger.
There is a small voltage safety margin in the design of the ESC he had chosen, and 15S of LiFePO4 (equalling 54V max) has worked out so far (though we don’t recommend it due to voltage spikes). Deecadded more low-ESR capacitors to the ESC input to help suppress voltage ripple to hopefully keep the ESC as safe as it could be.
Once the custom battery was built for the central triangle of Deec’s Kona, that severely limited the options concerning exactly where he could mount the drive on the frame. This may have seemed like putting the horse before the cart, but…this type of design was very new in 2008, and enthusiasm drove everyone involved to make the first steps before the entire plan was solidified.
______________________________________________________
The Freewheeling Crankset
There is a type of bicycle called a trials bike. For a variety of reasons, many of the riders of these acrobatic bicycles (like Danny MacAskill) have embraced the option of having the bicycles chainringfreewheel instead of the rear wheel. Because of this…there is a readily available selection of right-side crankarms with freewheel threads machined into them.
Here is an example of a threaded boss on a right side crankarm, in order to allow a freewheel to be attached there instead of the rear wheel.
These last two years, mid drives in this configuration have become common, but back in 2008…this was anuncommon solution to making a non-hub E-bike. If two chainrings are mounted to the freewheeling crankset, a motor can drive one of them, while the other one drives the rear wheel. Deec considered a variety of options (like the dual-parallel right-side drive on Roy’s eCortina), but eventually made the commitment to a freewheeling crank with dual chainrings.
Since the drives secondary reduction was definitely going to be #219 Kart chain, a custom adapter disc was machined to connect the 42T bicycle chainring and 80T Kart chainring to the flanged White Industries ENO freewheel. This is the same heavy-duty brand that was integrated into the primary reduction driven pulley seen above.
Deec had a machine shop fabricate a custom disk adapter to connect the 42T chainring and the 80T #219 Kart chainring to the freewheeling crank. The composite Extron chainring shown is only $20, and it runs quieter than steel.

Matt designed his dual-stage drives so that the central tube clamps allow the two halves to rotate, and this makes the drives’ shape more adjustable for different frames.

Deec used heavy-duty “Echo” brand trials crank arms with an ENO freewheel as the basis of his freewheeling crankset. Using chain for the secondary reduction is appropriate because chain is narrow and very strong. This Karting #219 chain can handle 10-HP+

______________________________________________________
Mounting the drive
The obvious place to mount the drive was just in front of the bottom bracket, but Deec initially feared that when crawling over large rocks and logs, that the drive might be damaged. This led to weeks of discussion over various other contorted possibilities. He briefly considered mounting the drive behind the seat-tube, but that required a switch to a smaller 20-inch wheel (which was OK), but the smaller wheel meant that the pedals were closer to the ground. In the end, he had to finally admit that the location just in front of the bottom bracket was the best compromise.
However, when contemplating an all-new frame design, Haibike has recently addressed this concern by designing an off-road frame that wraps under the mid drive.
A left side view of the Astro mid drive.
This build kept the bike narrow so it remains easy to pedal. Also, by keeping the weight centralized, the wheels stay as light as possible which helps the handling and feel of the bike on jumps.
_______________________________________________________
Giving the motor three speeds
When you have a motor-driven system with a broad power range, you don’t need as many gears to dramatically improve the motors’ performance, but how many is optimal? If your user-profile involves using only the motor most of the time, giving the motor 9 speeds might involve frequent shifting to get to the desired gear at any given moment, but…too few gears will limit your options.
Miles’ eMoulton and Roy’s eCortina have both decided that giving the motor three gears is the best compromise, and Deecanio agreed. There have been several builds where someone had used an Internally Geared Hub (IGH), but a sudden application of high power will sometimes break them.
Miles’ build was designed around efficiency and lightness, but Roy wanted high power, and Roy found that using external sprockets (with a common derailleur) can take more abuse than an IGH. Deec built up a freehub rear wheel, but instead of the 9-speed cluster, he used three single-speed cogs (along with spacers) to contrive a 3-speed sprocket-set.
Applying too much power might still break some of the parts, but the splined track cogs are much more affordable to replace (compared to a new IGH), and high-powered builds have posted that excessive power only causes the chain to loudly “skip” over the cogs, which makes a “ratcheting” noise. Be aware that if you want to try this, you might need to adapt the derailleur to accept a slightly wider chain (1/8″ vs 3/32″, referring to the width of the chain rollers and the sprockets)
This is a close-up of a splined freehub. They can accept as many as 9 sprockets, and Deec used three single-speed splined cogs to make it a very robust 3-speed that is shifted by a derailleur.
The drive as shown here used a 42T drive chainring, with 34T/22T/11T sprockets on a freehub-equipped rear wheel (vs a common multi-sprocket freewheel). Splined “single speed conversion” sprockets can be found on the web, and Surly is one popular source. The bike is geared slow (by using a smallish 42T chainring), and the top speeds in each gear are only 17, 23, 28-MPH (27, 37, 45-kph). These lower speeds work well for Deecs off-roading style.
“…I was hitting peaks the other day of around 80A and 3850W. These peaks lasted just a few seconds, but I repeated it often…maybe 10 times over a 5 minute period. I didn’t have my temperature widget with me, but my “calibrated” thumb said about 170F (76C). The controller was not hot at all…
…This is with the PWM [Pulse Width Modulation in  the controller] set to 16kHz and the timing set to “Normal”, which means the advance will vary from about 5-10 degrees. I think “Low” timing is 0 to 5 degrees of advance. Bob says his motors like about 10 degrees advance in order to get the max power out of them without excessive heat. I previously had mine set to “Low” timing, and the peaks were lower (about 72A), but the motor temp only got up to 108F (42C), up until I broke the master link on the [bicycle] chain…
… I will leave the PWM set to 13Khz. The difference between 13 and 24khz really was vast as far as temp is concerned – initially a [continuous] 30 second blast [uphill] saw the ESC soar to 176F (80C) whereasnow…it barely goes over 140F (60C), and that’s with continuous bursts”
Here is the epic discussion thread on this awesome build. As wonderful as it was in the form shown here, Deec continued experimenting with this build and others. GGoodrum had an Astro 3220 that was far too powerful for the 20-inch wheel it was driving, so Deec and GGoodrum swapped motors and Deec upgraded to the Castle 160A controller (among other experiments…)
_______________________________________________________
Written by Ron/Spinningmagnets, June 2014
Batteries from GEB.

2014年9月17日星期三

Boston Police using electric bikes for the marathon

The Boston Police department has been seen using electric bikes during the 2014 Boston marathon, which was held just a couple of days ago. The TV news video (ABC station affiliate WCVB) had very little information about the specifics of the bike, and only mentioned that the two biggest benefits were the added speed and endurance that it provided officers in crowds, and also that the integrated loudspeaker/siren was very useful for officers when addressing crowds.
This particular model (currently called the “Vbike”) was assembled by the Vision Motor Corp division (VMC) of Vision Industries. VMC ‘s main business is developing “fuel cell” vehicles that are powered by hydrogen for future zero-emission transportation needs. These six electric bikes are an opportunity to get some free publicity in order for their name to become more well-known in the alternative vehicles field.
A rear geared hub motor is the safe choice for an all-around E-bike that you are not yet certain about how they will be used.
The first six sample Vbikes were donated to the city by a Boston native, Bradley Birkenfeld…and will be evaluated by the Boston Police Department for further possible modifications. Mr Birkenfeld was present at the previous years marathon, and after the infamous bombing there…he wanted to do something to help the police in his home-town to be as effective as possible.
This is a screen-shot of a WCVB news video from You Tube.
The pic above shows the right side of the Vbike. There is a single chainring up front, and it appears there are only a few sprockets at the rear wheel. But…Boston is fairly flat, so having only a few gears to choose from shouldn’t be an issue.
The scarce published information states the battery is a 15-Ah Lithium-Ion pack providing 48V…so that is the good news, because both of those parameters are excellent choices. However, the geared hub motor in the rear is not very large, and is only rated to be a 500W motor, perhaps similar to the common Bafang-BPM. This would probably not be an issue in a flat city like Boston, except that it is listed as being capable of 30-MPH.
The most popular entry-level kits that are recommended to new E-bikers at the endless-sphere forum use 1,200W to achieve 28-MPH…and that is from the voice of experience.
Short sprints in pursuit of a suspect at 30-mph will be fine in a flat city like Boston, New York, or Amsterdam. However, any police departments with significant hills should be aware when reading this story that this model may overheat on a long uphill.
This is a close-up of the siren/loudspeaker that the Boston PD feels will prove to be very useful. 
The pic above shows the combination siren/loudspeaker, plus the red/blue blinky-lights along with the small LED headlights. The system wisely uses a pedelec sensor, so the officer does not need to manage a hand-throttle, and…these six officers were also issued a new “hands free” head-set system for communicating.
Written by Ron/Spinningmagnets,2014
Batteries from GEB.
http://www.gebattery.com.cn

2014年9月16日星期二

Qulbix Raptor 140, slimmer with a bigger battery



The Qulbix Raptor has a devoted following as an off-road E-bike that will fit any one of the large and powerful rear hubs that are popular. The large stock battery space of the Raptor frame box is 160mm wide. This is the widest frame space for the battery that is available, and it allows LiPo packs to be mounted sideways. Our original article on the Raptor can be found here.
Some builders wanted a Raptor that was just a little bit slimmer (to make pedaling easier), and others wanted a more square shape to the battery space, so that a Raptor could use the large-format square flat foil packs, since the original Raptor had a more triangular shape.
I scaled these two pics as closely as I could, so we could compare the new 140 and the standard frame shapes.

The new Raptor 140 is 20mm narrower than the original, at only 140mm wide (5.5 inches, less than the length of a dollar bill). However, since the main section of the frame housing has a more square shape, it actually has more volume than the original. The frame continues to be made from steel, but the side plates that cover the battery are made from aluminum, to further save some weight.
This is a single 14-Ah cell from GEB. This is their smallest available cell, they have several larger sizes. The long edge is 222mm (8.7-inches).
What batteries will fit?
The new Raptor 140 can accept flat foil cells that are as large as 200mm X 300mm. (7.9 X 11.8-inches)
The 20-Ah A123 LiFePO4 cells from the EV hybrid car  industry are 161mm X 227mm (6.3 X 8.9-inches)
Tenergy makes a 25-Ah LiPo cell that is 221mm X 223mm (8.7 X 8.9-inches)
Farasis has a 25-Ah Lithium-Ion cell that is 160mm X 230mm (6.3 X 9.0-inches)
_____________________________________________
Shenzhen General Electronics Battery Co, Ltd. Li-polymer
10C high discharge rated cell
36-Ah, 3.7V each. (Thanks to Jeff Wilkins for the info!)
218mm*228mm (8.6-inches, by 9.0-inches), I use 26S (2x13S) = 96V on my bike
_____________________________________________
Cells from the Nissan Leaf are rated for 33-Ah each, but they are just a tiny bit too large at 223mm X 303mm (8.8 X 11.9-inches). Information about these (salvaged from wrecked Nissan Leafs) can be found here.
Concerning 18650 cells (cylindrical, 18mm diameter, 65mm long), which come from the high-current cordless tool industry…65mm + 65mm = 130mm, so the width of the new Raptor 140 just might allow two 18650 packs side-by side. I’ll have to look into this.
I will try to find out what company makes the largest flat foil cell that will fit the new Raptor 140, so check back in a few weeks if this interests you.
The Raptor 140, slightly narrower, but with more volume.
Here’s a Raptor 140 with the highly recommended 19-inch motorcycle wheel on the back, and a 26-inch bicycle tire on front. This particular Raptor is using the Monster Cromotor with a super-silent sine-wave controller. Pic thanks to ES member “Hyena” in Australia.
Written by Ron/Spinningmagnets 2014

2014年9月8日星期一

Top 10 Elegant Garage Built Ebikes

Sometimes it stupefies me on how bad production electric bikes can  look (not the ones we usually review here).  Did they get their inspiration straight out of China?  In fact, some of the most elegant ebikes I have seen are garage builds. How can ebikes this pretty come out of a garage on a low budget? (well not that low of a budget) There is a true passion over on Endless-sphere to build fast and cheap bikes. But a few builders have a passion to also make something that is clean and truly elegant looking.Our definition of elegant:
  • Could pass as a production bike….in fact should be made into a production ebike.
  • Wiring well hidden (no rats nest)
  • Nice hidden battery location (as unboxy as possible)
  • The more ebike porn the better
  • No duct tape
  • Great fit and finish
Mid drives are preferred over hub motors because of their complexity and difficulty in making look good.
The ebikes on this list cost over $3000 in bicycle,  materials and parts to  build, and some of them much more.
Fast is not a qualification  for this list. However most of these bikes just happen to be fast.
Most of these ebikes are converted pedal bikes  although a few have frames built from scratch and deserve extra kudos: Dogati, Phaser, Ebee, and Drunk Skunk.
6 of these ebikes are full suspension, a rare trait in a production ebike.

#1 Dogati

Ben Chiu is a talented engineer who put 2 years of his heart and soul into this bike, and still does not consider it finished. He is building what he feels is the perfect ebike and plans to bring it to production…not for money but for the love of it.
This bike with its polish has been an inspiration to home builders, and really raised the bar on what a garage built bike can be. (Ben has some pretty fantastic tools in his garage.)

#2 Specialized Super Charged

Simon is a gunsmith who lovingly converted his Specialized Big Hit into this masterpiece, featuring a hub motor built into the frame as a mid drive.  No wire or plug is out of place in this electric bike.

#3 E- Moulton

The “E-Moulton” was built by English builder “Miles.” This Ebike defines elegance and is the very bike I was thinking of when I dreamed up this story.  It is based on a TSR Moulton bike.  It has a top speed of 22mph and a range of 15 miles.

#4 Santa Cruz Astro

Motomoto is an ultra  talented  machinist who has a big garage full of CNC  tools, and he  put them to work on this amazing creation. I have seen and ridden this bike and it has a tight and elegant finish even though it is capable of speeds of 65 mph.   Can you find the Hobby King Lipo’s on this bike? They are the blue packs buried in the carcass of the drive system.

#5 Ebee

The Ebee was meticulously crafted to win over pedal bicycle fans at the North American Hand Made Bike Show.  Although this bike looks to be very fast it is a civilized under 30mph bike. The battery packs are behind the carbon fiber panels in front of the bottom bracket.

#6   Phasor Cycles

Phasor Cycles was developed as a college mechanical engineering project which turned into an after college  business for David Pearce. The frame is tediously welded together in David’s garage, to form a hollow carcass perfect for hiding batteries and wiring. Hats off to Phasor Cycles for being the only bike on this list to make it to production so far, and one of the better options out there for a full suspension off-road electric  bike.

#7   Recumpance Tadpole Trike

Matt Shumaker has made some spectacular ebikes, but recently devoted his attention on e-trikes which are more stable platforms to contain lots of horse power (think 50mph)and have very convenient places to hide battery packs and wiring. As it turns out an awesome combination. Matt helped design the FFR Trike.

#8 Super Commuter

Kepler’s  ”Super Commuter”  was expertly  built as an ebike that could ride in the commuter bike lanes and not get a second look.  The battery pack is hidden in the seat bag, the wires are not visible, and the motor is small enough to be hidden in the wheel. Could you tell the above bike is an electric bike if it silently glided past you at 30mph?

#9 Nader’s Mini Hub Mountain Bikes

The thing about Nader is he didn’t just build one electric bike, but an entire fleet of 250 watt hub motor powered ebikes….all of them very clean and super stealth, and all worthy of this list.

#10 Drunk Skunk’s Red Monster

Drunkskunk knows that when you build the frame from scratch you have perfect spaces to hide battery, wiring and controller. In this case the motor is in the rear wheel.








2014年9月3日星期三

12 E-bike KIT power levels, from 360W to 8,000W

If you are fairly new to the idea of an E-bike, and you think you might want one, this article hopes to give you some info to help you get some kind of an idea about what type of kit will fit your needs.
Factory E-bikes are very expensive compared to the kits that you can get and install on your own bike, but…some people don’t mind paying more to get good customer service from a local dealer, and getting a turn-key factory E-bike that they can begin riding immediately.
But…if you are mechanically handy, and can install a basic E-bike kit yourself…the kit ideas below may save you some money. Using a kit will also allow you to use a bicycle frame that you chose yourself…to allow you to save even more money, and to also get a bike frame that is the best possible fit for you.
___________________________________________________________
Before we get started, forget about the wattage ratings of the advertisements for these kits. One horsepower is 746-Watts, and the method of rating a kit is to multiply the voltage times the amps. So, a 36-Volt kit that has a controller that can use a max power of 20-Amps would be 36V X 20A = 720W.
The power that you need (or want) is further complicated because the true limit of the power you can put through a motor is how much heat it can survive. If you take a given motor and begin raising the volts, you will get some extra power, and also the motor will spin faster than it did at a lower voltage. If you begin raising the max amps, the acceleration will get faster, but…adding more amps will cause most of the heat that will kill a motor (and sometimes the controller).
Factory power ratings are rarely accurate. Legitimate sellers under-rate their kits, because so many buyers will overheat their E-bike and want to have the motor and controller replaced due to heat damage. Then, there are the other retailers…the ones that don’t answer their customer service lines…they claim their kit will put out thousands of watts and will climb anything!…and then when you melt something, they refuse to help you.
Here’s a tip about raising the power that you can use on all these kits. If you are running on fairlyflat land, you can run much higher amps for some very impressive acceleration. You will draw the max amps setting for only a few seconds while the bike is speeding up, and once your top-speed stabilizes…the amps draw slides back down to a low setting that only needs to maintain your speed, and that gives the motor and controller a chance to cool down before the next acceleration.
But here’s the worst-case-scenario…you loan your E-bike to a friend who doesn’t understand this and then they ride it up a very long and steep uphill at full-throttle. With no cooling-off phase, the motor and controller overheat, and your friend has to do the “walk of shame” back to your place. This is where you should have limited the max amps the kit can provide (a Cycle Analyst E-bike computer is an easy way to adjust the amps the controller can draw).
The popular MAC is generally regarded as capable of performing very well when using 25A, but…if you live in a very flat region you could actually use more. One of the reasons the MAC has grown in popularity is because it’s one of the few kits where you can order it with a temp sensor installed inside the motor from the factory (ebikes.ca is the other seller with temp sensors). If you have a Cycle Analyst (the best E-bike computer on the market), you can easily adjust how many amps the controller can use, so you can adjust it to get the max power possible…without melting anything.
Now that all that has been said…lets get on to these system recommendations!
_________________________________________________________
The stylish Faraday Porteur, with a small “mild assist” front geared hub motor.
360W
36V X 10A
Small front geared hub-motor…Tongxin
The Tongxin is so tiny, most people won’t realize you have an electric motor. There are several other 250W-rated motors of similar size, but I am recommending the Tongxin because of its one quirk…even though it is considered a geared hubmotor (the motor spins faster than the wheel to aid its torque and efficiency), it uses smooth rollers instead of toothed gears.
This is both it’s greatest benefit…and greatest weakness. The big deal about the steel rollers is that…because they are smooth, this motor runs almost silently. This ultra-quiet operation can further be emphasized by using a sine-wave controller, but…even with a common square-wave controller, the small-diameter sideplates are not very resonant. Another benefit is that the drive-roller can be very small, so these have a 12:1 reduction, instead of the common 5:1 when using toothed gears.
If you can be happy with 360W, this sweet little Tongxin motor runs very quietly. Oddly enough, it is also an inrunner, but…don’t even think about trying to hot rod it!

The reason the smooth rollers are also a weakness is because almost everyone who begins using an electric motor typically wants “just a little” more power. These roller will begin to slip a bit if you try it at higher power levels, but I’m not exactly sure where the limit is…because I’ve never been very interested in these extra-small motors (which are typically rated as 250W to appeal to countries with power limits). I suppose you could use these at 24V and higher amps, but…geared motors of all sizes shed heat poorly, so I recommend 36V and then use lower amps for a long life. About 10A is reported to be just right.
I’m recommending a front wheel motor, because at 36V X 10A = 360W, the extra hassle of mounting a rear motor isn’t needed, and just about any steel forks can easily handle 360W with a single torque-arm (yes, use a torque arm, even at only 360W). The Tongxin motors have also been re-branded as ethinkar / Nuergy / Tarn.
If you want to read about others brands of the small 250W-rated  geared hub motors,  check these out.
Here is the tiny Tongxin mounted in a custom bracket to make it a mid-drive, so the low-powered motor will have the use of the bikes gears. You can easily imagine one of these tiny motors discretely located in the front wheel.

_________________________________________________________
540W
36V X 15A
Front or Rear small geared hub-motor…Bafang SWXH
Our friend Kepler had decided at one point to put together a very stealthy carbon-fiber road bike, that he could ride on the bike paths near his home. In order to blend in with the pedal-only traffic, the motor would have to be small and quiet. After some research, he settled on a Bafang SWXH geared hub, mounted in the rear wheel.
This motor has teeth on its internal planet gears, and it also has more copper mass than the Tongxin, so it can take more power. These have been regularly used with 15A, so that’s a pretty safe heat level to run it at. I wouldn’t use it at less than 36V (36V X 15A = 540W), but be aware that several builders have used these at higher voltages (48V-72V) without a significant increase in the heat.
These run fairly quietly, but there is a slight buzz from the gears during acceleration. If you use asine-wave controller, the power control will be slightly quieter. However…with motors that have internal gears, you will always have some mechanical noise.
Its possible to use a Bafang SWXH on the front wheel, but it is just about large enough to occasionally draw attention (if you are trying to fly under the radar as a stealthy electric bike). Use a torque-arm, and if it is a high-quality torque arm, just one should be enough at 540W.
The Bafang SWXH is one proven option, but at this power level, there are dozens of 250W-rated hubs that will work well.
Once the SWXH is mounted between the sprocket-cluster and the disc brake, it’s practically invisible.
_________________________________________________________
720W
36V X 20A
Front Geared Hubmotor…Bafang-BPM
The Bafang BPM is one of the most prolific electric bike geared hub-motors on the planet. It is pretty much the default 500W-rated motor used by every generic E-bike manufacturer in China. This motor has a large enough diameter that you can’t really hide it. If you use a front motor while conveniently mounting the weight of the battery pack on a rear cargo rack, the balance of the bike will be fairly neutral.
By using it on the front wheel, the installation is very easy. Also, by adding some pedaling, you can have 2WD. The rear wheel can have any stock gearing system that appeals to you, with as many speeds as you like. Enthusiasts of this configuration have reported that a front motor is more stable in slippery conditions, but…it also slips more on a wet uphill compared to a rear motor. Of course, there is a rearBPM available, and also a cassette-geared version (as opposed to the common 7-speed freewheel).
You can use more volts (up to 72V has worked well because of the BPM’s low pole-count), but a 36V system uses an affordable battery to go with this affordable mid-sized motor. 20A controllers are common and cheap, and if you experiment with too many amps and fry the motor or controller…they are both cheap to replace.
I don’t recommend direct-drive hubs (or high-powered hubs of any type) on the front wheel. At high power they can damage the drop-outs and lead to a crash, and at low power the geared hubs are good enough because they are lighter and they freewheel easily without a DD hubs cogging. Performance-wise, a high powered front hub (whether DD or geared) can spin out easily…instead of accelerating.
Whether you use a DD hub or a geared hub on the front forks, use two torque-arms at this power level. Kits at this level of power work very well for the US federal speed limit of 20-MPH. Also, since this power level still allows you to safely use the hub-motor on the front…you can still use an Internally-Geared-Hub (IGH, like a Nexus-7) or the standard derailleur 21-speed external sprockets.
The mid-sized BPM looks fairly large here because the wheels are only 24-inch, and the brake disc is also a small diameter.
_________________________________________________________
960W
48V X 20A
Rear Geared hub-motor…Bafang-BPM
This is a very popular combination. Geared hub-motors freewheel easily when only pedaling because they have an internal freewheel. If you limit the amps to 20A, the BPM should last a long time, and…at 48V it will have about 30% more power than when it is driven with 36V. Of course a 48V battery will be more expensive, but if you have mild hills…a rear BPM at 48V will work better than a front BPM at 36V.
A hub-motor with a Kv (turn-count) that provides 20-MPH at 36V…will likely provide about 26-MPH at 48V.
Here’s the mid-sized Bafang BPM geared hub in the rear wheel. With the battery also in the rear, this bike will be tail-heavy and handle poorly. With this big cruiser frame triangle, there is plenty of room to put a triangle-shaped battery pack, which would dramatically improve the bikes weight-distribution and handling.
_________________________________________________________
1,200W
48V X 25A
Large diameter rear Direct-Drive hub…9-Continents (9C)/E-Bikekit.com/ebay:Yescomusa/Magic Pie/MXUS
These next two recommendations are the most popular, a large geared hub or a large direct drive (DD) hub at 1,200W. As long as you’re riding safely, kits with this power level will visually pass for the legal 750W in the USA, and 500W in Canada. A DD hub will probably remain the cheapest option at this power level because of their simple construction, but be aware the large diameter (which helps the leverage of the magnets to produce more torque-per-watt)…is also what means that these kits will never be stealthy, and people everywhere will stop you to ask what it is.
The big benefit of a DD hub is the low purchase price and quiet operation (which can be even quieter with a sine-wave controller upgrade). These often come with a 20A max controller, but there is a significant increase in acceleration when going to 25A, and also at 30A. Somewhere between 30A and 40A, they will be in danger of overheating, depending on how much time they spend at the max amps. DD hubs also have a small amount of magnetic drag when just pedaling without power (called “cogging”), so be aware the MAC geared hub listed below is lighter and freewheels easily when just pedaling. 25A is the most common max setting…high enough to have a lot of fun, low enough that it almost never overheats.
As to copper mass, these typically have a 28mm wide stator. If you live on flat land with few stops, you can use 40A every day for wicked acceleration (as long as your battery can survive that). But…if you ride up a hill that is long enough and steep enough…even just 30A will fry it…However, these are the cheap hub-motors that have been used at every voltage from 36V to 111V, so if you damage just the motor they are cheap to replace.
Any amperage above it’s saturation point will make a lot of waste heat, which is inefficient, but…drill some air-venting holes in the side-plates to let the heat out, and these motors can be abused until they scream.
Chris makes custom battery cell electrical wiring harnesses for his business at “LiPo Connection Solutions“. Here is his 66V rear DD hub E-bike. His battery is centrally located in a “Falcon EV” triangle bag, which is described here.
_________________________________________________________
1200W
48V X 25A
Rear geared Hubmotor…10T MAC
Here is an example of the MAC geared hub motor from em3ev.com (one of our top three favorite vendors). The MACs stator is 25% wider than the BPMs, so the extra magnet width provides about 25% more power per watt that’s applied. The extra 25% of copper mass also allows more amps to be used, so I am recommending a 25A limit when you only have mild hills (for flat land, you can increase the max amps because there is plenty of cooling off time when you’re just cruising along). But…for a long steep uphill, you really have to watch the motor heat.
Once you move the battery weight to the center of the frame, the bike will have a much better balance and feel when riding. A 10T MAC using 48V will provide about a 28-MPH top speed on flat land (45-kph) when using 26-inch wheels, and it climbs mild hills very well. This is the most popular recommendation at the forum endless-sphere.com for most new users, and it has many happy customers.
Like the DD hub listed above, you can get snappier acceleration when upgrading from 25A to 30A, but you have to watch the heat! Geared hubs have a poor heat-shedding path, so if you think you may want to hot rod the motor later with 40A or 72V…get the DD hub. If you are certain you can be happy with 1,200W, then…this is the most popular combination.
Here’s a rear geared MAC with a DIY triangle battery pack.
_________________________________________________________
1,200W
48V X 25A
Small mid drive…Bafang BBS02
This kit has created a lot of buzz recently, and here is our article on it to get more details. Bear in mind the MAC kit listed above (providing the same 1,200W) will cost less, but the place where the BBS02 really shines in on steep uphills. The BBS02 uses the bikes gears (usually 7 sprockets at the rear wheel), so that it can have high top-speed on flat land, and…then you can downshift to provide awesome hill-climbing…so the motor stays up in it’s best RPM range to keep it from getting too hot.
Plus the weight of the BBS02 motor is moved to the center of the frame, to make the bikes balance as good as it can possibly be. Another benefit of mid-drives is that the tires are easier to fix when they get flat, and they seem to get flat less when there isn’t as much weight on the tire (pushing the tire down onto sharp debris).
There are a couple of user profiles where this kit truly satisfies, and is worth the extra cost. If you live where there is a power limit (like 250W in Europe/Australia, or 500W in Canada/Switzerland), this small motor will usually pass for a low-watt system. The other place where this is really worth the extra money is if you have steep uphills. You can downshift the bike so the motor remains at the higher RPMs, unlike a one-speed hub motor.
Downshifting a mid-drive on an uphill is not only more efficient, it prevents the motor from overheating when compared to a different one-speed hub-motor system that might bog down. It is reported to have an internal over-heat protection circuit for those times when you accidentally try to climb a steep hill in too high of a gear.
The Bafang BBS02 750W mid drive at 48V.
_________________________________________________________
1,500W-2,800W
Mid-sized Off-Road Mid drive…LightningRods kit
About a year and a half ago, we wrote about a new kit from GNG, found here. The configuration was well laid out, and this motor is fantastic in this application, but the rest of the kit had many weaknesses, especially the 12T freewheel and the BB-cartridge. Endless-sphere member “LightningRods” began designing and making replacement upgrades for the kit until eventually, he was remaking the entire kit…except for the excellent motor.
It’s possible to use this kit on a hardtail street commuter, but where it really stands out is when it’s used on a full-suspension off-road frame. This motor has performed well at 30A, and it sheds heat well, since it is an inrunner. At 48V X 30A = 1,440W, it’s performance is outstanding! But...it gets better than that. The low pole-count means this motor can be run at very high RPMs without excessive waste-heat produced from eddy-current losses. This means that it was tried and successfully verified to run well at 72V (and also 100V!). 72V X 40A is an awesome 2,800w!
Of course, if you are running at 100V (and 100V X 30A = 3,000W), the  motor is spinning fast enough that you will not be able to pedal along with the bike to help. But…at 100V, I would recommend keeping your eyes on the trail instead of pedaling! If you add a temp sensor, you can use even more amps than 30A, up to 40A. Being a mid-drive, this kit puts the motors [fairly light] weight in the center of the frame. This makes the bike more nimble compared to using a heavy rear hub.
These kits can be ordered now, but since they are unusually popular and in limited supply (while this business ramps up production to keep up with demand), it will be a lucky few that can get their hands on this kit. There may be a waiting list, but it is well worth the wait if you want  a powerful and light off-roader that is robust, reliable, and will last.
If you want to run more than 3,000W, you will have to sacrifice letting the motor use the bikes gears, which is the biggest benefit of a mid-drive. 4,000W will break bicycle chains and sprockets (or at the very least, wear them out unusually fast).
The LightningRods mid drive kit.
_________________________________________________________
1,900W
48V X 20A…(times TWO for 2WD)
There have been several 2WD E-bikes featured recently. The Mental Manno from Croatia, Teklektiks Mundocommuter in the US, and Bens AWD “Duty Cycle” in Taiwan. If you scan this build index from a Russian E-bike forum, you will find a dozen 2WD E-bikes (because of the snow in Russia over half the year).
They all use one throttle and one battery, but…they also used two controllers, and two identical geared hub motors (which freewheel). So…why would someone want two smaller motors, when you could just use one very large motor (like the systems listed below this)?
There are several reasons. First of all…in slippery or extra steep conditions, 2WD will have bettertraction. There are some conditions where no matter how much power you have, a single motor would just spin out, instead of accelerate. Secondly, all of these builders mentioned they liked the redundancy. If you live where it is extra steep, being far from home when a motor or controller has an issue can be a nightmare. With 2WD, the second motor and controller allows you to have a “limp home” mode.
The 1,900W number above is from using Bafang-BPMs at 48V X 20A = 960W (times two motors for 1,900W), but Bens Duty Cycle uses a pair of the larger MACs, and he is running 57V X 53A = 3,000W (times two motors) for 6,000W of 2WD traction. And yes, he does have temp sensors on both motors to make sure he doesn’t fry anything. He uses a handy 3-way power switch from em3ev.com to limit amps when climbing, and to use max amps on flat land to embarrass drivers who think their cars are fast…
Bens AWD Duty Cycle. Notice the torque-arms!
_________________________________________________________
2520W
72V X 35A
Rear Direct-Drive hub…Crystalyte H35XX (available as an H3525 or H3540)
If you have sampled 35A in a rear hub…and you like it…you really need more copper mass than the common 28mm wide stators in the 9C sized DD hubs. The Crystalyte H35-series has a 35mm wide stator (25% more copper), and it still allows the use of a common 7-speed freewheel while also fitting in the common 135mm wide drop-outs of all the widely available bicycle frames.
We have featured two E-bikes so far with this well-regarded hub and all three builds have some similarities. They are Rodgah’s Big Hit FSR, and the Electra Townie by Nick. You could get more power from an even larger hub than the H35-series, but…even though these builders like the near silence of a DD hub, they didn’t want any more weight out at the rear wheel than necessary, so…they used higher volts in the smallest hub that would satisfy their needs.
After you have had a hub-motor for a while, and you decide you want a little more speed and acceleration, everyone tells you to up the volts to the most you can afford (and can fit into the frame), then…you raise the amps to the max possible while still keeping the motor under 93C/200F. For the performance of 72V and 35A minimum, the Crystalyte H35 is the most affordable and lightest hub that can reliably provide that.
But…if you read the build-logs listed above, some of these builders used 100V, along with temporary peaks of 50A (with air-venting holes in the sideplates and temp sensors), for a whopping 100V X 50A = 5,000W. If you want to spend a lot of time riding faster than 30-MPH, I recommend a DD hub instead of a geared hub. Even 2WD MACs work best when limited to 30-MPH, plus…at those speeds you really need a good front suspension, which doesn’t go well with a large and powerful hub in the front.
Here is Rodgahs Big Hit FSR, with a Crystalyte H35 and a large battery that you will NEED to provide high volts and high amps.
_________________________________________________________
2880W
72V X 40A, Crystalyte H40XX (available as an H4040, H4065, H4080)
This motor has an almost identical construction as the HT35XX listed above, but it has a wider 40mm stator, and the extra copper mass will let it use more amps than the HT35XX (under the same conditions), or…it will run cooler at the same amps.
The 4080 will fit into common 135mm wide bicycle frame drop-outs, but it’s extra width means it will easily fit only a 5-speed freewheel. The core of this motor is a common stamped steel plate, so it cannot absorb as much of a temporary heat spike as the Crown motor listed below (with the Crowns’ heavy aluminum core).
The Crystalyte 4080 with the thin stamped steel core is on the left, and the Crown with the thick aluminum spokes is on the right._________________________________________________________
3600W
72V X 50A
Rear Direct-Drive hub…The Crown
In this power category, you could use “The Crown” motor, also from Crystalyte. It uses a 40mm wide stator, which is bigger than the H35 listed above, and less than the 50mm stator on the Cromotor listed below.
The Crystalyte 4080 also uses a 40mm wide stator, but there are differences between these two motors though…the 4080 has a less expensive steel stamped core, and it also is narrow enough to allow you to squeeze in a 5-speed freewheel (not that you’ll be pedaling much with 2880W), and it uses common spokes.
The Crown is more expensive than the 4080. It uses a thick-spoked aluminum core that helps absorb temporary heat spikes, so the 4080 would be acceptable on a flatter commute, and the Crown would be preferable for frequent stops and some hills (which require more high-amp peaks). The Crown also hasdeeper stator slots, so it can hold more copper mass in the windings.
One limit on the Crown is that it will only fit a single-speed freewheel when using common frames, but both of these motors should still fit into any common steel-framed bicycle. If you want to use this on an aluminum frame, you will need custom steel clamping drop-outs, since this power level will likely break common torque-arms (even when using two of them).
Be aware the Crown uses a custom spoke arrangement so that it has better spoke angles when it is mounted on a smaller wheel. If you add a temperature sensor, and keep an eye on it, this motor should be able to use 72V X 65A for an impressive 4680W.
The Crown has four Kv’s available (ebikes.ca only retails two, the TC80, and the TC100). This may be a consideration, because the Cromotor below is only supplied with one Kv selection.
The Crown motor from Crystalyte.
_________________________________________________________
4300W-8000W
72V X 60A–100V X 80A
Rear Direct-Drive hub…Cromotor
I can’t imagine going to the trouble of buying an expensive and heavy hub motor, and running it on only 48V and lower amps, so…these recommendations will require a lot of Watt-Hours (WH) of battery volume. This is going to be the single biggest issue in this category…fitting enough battery mass on a bike frame to supply 72V-100V and also 60A-80A.
The popular choice by a longshot is the monster Cromotor, with its 50mm wide stator. The most popular frames for it are frame kits from Phasor, the Greyborg Warp, and also Qulbix Raptor. Our friend Martinbuilt a street commuter using a robust downhill (DH) bicycle frame, but he had to order some custom rear drop-outs to accept the Cromotors 145/155mm wide axle shoulder. He also used an unconventional twin suitcase saddle arrangement to house the high-WH battery that is needed to feed this hungry beast because there was no room in the frame.
The three frame kits listed above have each chosen to house their large battery packs inside a hollow boxed frame. Any of these full-suspension frames can be run on the street…or off-road. Most of the Greyborg builders seem to be running on the street, where the muscular mass of the Cromotor is not an issue.
However, the Phasor and Raptor builders are more likely to build an off-road E-bike, as a sort-of lightweight dirt motorcycle, that can still be pedaled home on the streets due to the quiet motor (instead of a dirt-bike gasser engine). This is likely because the Phasor and Raptor frames allow a much longer rear shock than the Greyborg.
The Phasor has the slimmest frame at 100mm wide (for easier pedaling) but…if you want the absolute highest battery volume, the 160mm wide Raptor is the one. The Greyborgs 110mm wide frame is in the middle…slim enough for easy pedaling, but more battery volume for higher volts and amps.
72V X 60A is 4300W, which is the minimum watts that make the cost of a Cromotor system worthwhile, but…all of these frames have also been successfully run with a Cromotor at up to 100V X 80A for a brutal 8,000W. On frames this light, you would be shocked at how easily it can out-accelerate some VERY expensive and exotic sports cars at that power level.
The Cro has the massively wide 50mm stator, but it also has the very thick aluminum stator core to absorb the temporary extra heat of large amp-spikes.
Here’s a fat Cromotor driving motorcycle tires on an off-road-spec Raptor. If you hooked this bike up with an inverter, a battery this big could run your TV during a power outage for days!
_________________________________________________________
Written by Ron/Spinningmagnets, 2014
http://www.gebattery.com.cn Hotline:+86-755-81762725-616 - GEB Official Site. Offer custom batteries, custom battery packs, Lithium ion batteries, LiFePO4 batteries, polymer batteries, LiMnNi batteries, LiNiMnCo batteries, lead acid batteries, battery chargers, battery testing equipment, welder machine, rc batteries, diving light batteries, ebike batteries, gps batteries, PCB, PCM, BMS system.